DSATX 4.5V output in all rails?

220 Watt DC-DC ATX Power Supply
RipplingHurst
PostsCOLON 3
JoinedCOLON Sat May 17, 2008 12:27 am

DSATX 4.5V output in all rails?

Postby RipplingHurst » Mon Aug 25, 2008 6:37 am

My DSATX stopped working after less than 6 mo. of use...

Now I only see 4.5V output in all rails, the computer pulses on and off. Any solution? What could it possibly be?



No error codes: the red led goes on, acc off, the red led blinks once, etc. The CPU fan starts for a second, then stops. With a 120V AC PSU, the computer starts fine, the 12V rail (say, on the 4 connector cable to the MB) only shows 4.5V on the DSATX, while shows 12v on the normal 120V PSU.

I just changed my case, maybe I have damaged something with some static electricity discharge or something? Physically it looks fine...

Sounds like it's repairable?
Infiniti M35 Carputer <a href="http://www.mp3car.com/vbulletin/worklogs/118659-2006-infiniti-m35-sport-carputer.html">Worklog</a>

Return to

Who is online

Users browsing this forum: 2 and 0 guests

cron