The voltage at the node where the resitors meet should be between 0.42 and 0.73 volts or 0.58 volts nominal. 0.58 volts is 25 degrees C
By putting in these reistors, you can bypass the temperature sensor. You have to remove the temperature sensor.
R1*7.62 = R2
Choose random value for R1 between 1k and 10k. Choose R2 based on formula.
R1 = 1K ohm
R2 = 7.62k ohms
Since 7.62k doesn't exist, you can use 7.5k or something close..